Chain saw

Chain saw Partner Industrial Products is now offering the Partner K950 chain saw with diamond chain, designed specifically for cutting through thick concrete. The K950 chain saw can cut perfectly square corners without over-cuts and make up to 15-in.-deep cuts from one side.

The concrete chain is ideally utilized as a complementary saw, where the first cuts are made using a conventional concrete cutter. Used in this manner, the concrete chain can reduce the overall time and cost per cut.

Whether cutting through openings in concrete, navigating irregular cuts or cutting concrete piping without the risk of cracking, the K950 provides improved access in tight situations, improved control and less gyration.

For more information contact Partner Industrial Products at 800-323-3553 or laura.l.major@partnerusa.com.

Cordless combo kit

This Bosch 18-volt combo kit comes with the Brute Tough cordless hammer/drill driver, circular saw, reciprocating saw, flashlight, bonus jig saw, 18-volt batteries and a one-hour charger.

The 18-volt Brute Tough hammer drill/driver features:

• Steel-reinforced collar for durability, which protects tool when dropped on the chuck
• Unibody powertrain for maintaining alignment between clutch, gearbox and motor
• DuraShield housing to withstand real world conditions
• Two-speed gearbox optimized for two modes of operation

The 18-volt circular saw features:

• Rear depth adjustment to match depth of stock for more accurate cuts
• 50 degree bevel that cuts 2-in. material
• 45-degree positive stop

For additional information, go to www.boschtools.com.

Skid steer loader

Thomas Equipment has introduced its new Model 35 Series tracked mini skid steer loader. The 35DT has been redesigned and features an enclosed drive system, integrated large volume fuel and hydraulic oil reservoirs as well as a larger operator compartment.

The 35DT track drive features a longer wheelbase, increased wrap around the drive sprockets to reduce the possibility of slippage or ratcheting. The ride-on loaders 9-in. rubber tracks are designed to provide smooth operation, increased flotation and maximum traction while keeping the operator high and dry in any terrain.

The 35DT is powered by a Kubota diesel engine that puts out more than 25 net horsepower. Its high breakout force, 22,00 lbs., combined with 11.5 gpm hydraulic output and multi-speed range capability of up to 4.4 mph ensures quick work cycles and maximum productivity. Operator friendly, the loader is equipped with a universal quick-tach system for maximum versatility and standard self-leveling keeps the bucket or an attachment such as pallet forks level throughout the boom lift.

For additional information contact Peter Mabee at 866-BE-TOUGH.